Examples

A forced HardFault with CFSR, HFSR and BFAR. The fault bits are decoded and tied to an I2C timeout 60 ms earlier.

A LoadProhibited panic with register dump and backtrace. The faulting address points at a NULL pointer plus an offset.

The task watchdog fires twice. The report names the task that hogged the CPU and the one that starved.

A sensor init keeps failing on I2C, the watchdog resets the board, and the boot banner repeats.

An ASSERTION FAIL in the Bluetooth host escalates to a kernel oops with the faulting PC and thread.

One IMU goes from NACKs to a stuck bus to offline while two other devices on the same bus stay healthy.

A write times out, the journal aborts, and the filesystem is remounted read-only.

The brownout detector fires during boot and resets the chip.

The stack-overflow hook fires and names the task that ran out of stack.

A HardFault escalation reported by the Zephyr fatal-error handler.

Two sensors fail on I2C: no ACK, an ID mismatch, and an arbitration loss.

A noisy serial link reports an RX timeout, a framing error, and an overrun.

An SPI flash transfer fails with a CRC error and an RX FIFO overflow.

Nothing faults, but a clock fallback, a thermal limit breach, dropped messages, and a late watchdog kick all show up.

A recovered stack overflow, a retried I2C NACK, an ADC reading pinned to the rail, and a corrected flash ECC error.

A normal boot with nothing wrong. The analyzer should stay quiet.